JVC GR-SXM277UA Service Manual page 25

3.2.2 ASSEMBLY/DISASSEMBLY OF CABINET PARTS AND ELECTRICAL PARTS
Disassembly procedure
STEP
Fig.
PART NAME
No.
No.
[1] LOWER CASE ASSEMBLY Fig.C1
[2] B/W VF ASSEMBLY
[3] TOP OPE UNIT(S)
TOP OPE UNIT(M)
[4] CASE COVER(S) ASSEMBLY Fig.C2
CASE COVER(M) ASSEMBLY
[5] UPPER CASE(S) ASSEMBLY Fig.C3
UPPER CASE(M) ASSEMBLY
Inc. MONITOR ASSEMBLY
[6] COVER (UPPER/M) ASSEMBLY Fig.C4
[7] MONITOR ASSEMBLY
[8] FRONT COVER ASSEMBLY Fig.C5
Inc. DC LIGHT,MIC
[9] DC LIGHT ASSEMBLY
[10] MIC
[11] FRONT FRAME SA
NOTE 5 :
Take care not to break or damage the FRAME.
NOTE 7a :
Take care not to cut the FPC wire.
NOTE 7b :
Insert and attach the SHEET(FPC) between the MONITOR
FPC and the UPPER CASE(M)ASSEMBLY.
NOTE 7c :
Attachment of the FPC
NOTE 7d :
For disassembly of the MONITOR ASSEMBLY, refer to 2.4
ASSEMBLY AND DISASSEMBLY OF [7]MONITOR AS-
SEMBLY (CABINET PARTS).
NOTE 8a :
Take care not to damage the OP BLOCK ASSEMBLY when
and after the FRONT CASE ASSEMBLY is removed.
NOTE 8b :
Attachment of the WIRE
POINT NOTE
8(S1),CN1a,b,c -
3(S2) -
CN3,(S3),(L3a),(L3b),2(L3d) -
CN3,(S3),(L3a),(L3b),(L3c),2(L3d)
(S4),2(L4) -
6(S5a),(S5b),(L5) NOTE 5
CN5,6(S5a),(S5b)
3(S6) -
S7a,L7,SHEET(FPC),2(S7b) NOTE 7a,b,c,d
CN8a,CN8b,(S8),L8a,L8b NOTE 8a,b
2(L9) -
S10 -
2(S11) -
Destination of connectors
CN.NO. CONNECTOR
CN1a MAIN CN27
CN1b MAIN CN13
CN1c MAIN CN12
CN3 MAIN CN18
CN5 MAIN CN16
CN8a MAIN CN6
CN8b MAIN CN8
PIN
NO.
SPEAKER - 2
ZOOM UNIT - 14
B/W VF ASSEMBLY - 3
TOP OPE UNIT - 13
MONITOR ASSEMBLY CN7601 25
DC LIGHT - 2
MIC - 2
(No.YF016)1-7