JVC KD-S12 Service Manual page 8

3.1.7 Removing the CD mechanism assembly
(See Fig. 7)
• Remove the front panel assembly, bottom cover, side panel,
rear bracket and main board.
(1) Remove the three screws H attaching the CD mechanism
assembly on the top chassis.
(2) Take out the CD mechanism assembly.
3.1.8 Removing the switch board
(See Figs.8 to 10)
• Remove the front panel assembly.
(1) Remove the five screws J attaching the rear cover on the
back side of the front panel assembly. (See Fig.8.)
(2) Release the twelve joints f and remove the rear cover. (See
Fig.9.)
(3) Release the joint g and remove the switch board from the
front panel assembly. (See Fig.10.)
1-8 (No.MA216)
CD mechanism assembly
Fig.7
J
Rear cover
Fig.8
Rear cover
f f
Fig.9
Switch board
g
Fig.10
H
Top chassis
H
J
J
f
f
Front panel assembly