JVC KD-S12 Service Manual page 7

3.1.4 Removing the side panel
(See Fig.4)
• Remove the front panel assembly as required.
(1) Remove the screw B and two screws C attaching the side
panel on the left side of the main body.
(2) Remove the side panel from the main body.
3.1.5 Removing the rear bracket
(See Fig.5)
• Remove the bottom cover.
(1) Remove the three screws D, three screws E and two
screws F attaching the rear bracket on the back side of the
main body.
(2) Remove the rear bracket.
3.1.6 Removing the main board
(See Figs.5 and 6)
• Remove the front panel assembly, bottom cover and side pan-
el.
• Remove the front chassis assembly as required.
(1) Remove the three screws D attaching the rear bracket on
the back side of the main body. (See Fig.5.)
(2) Remove the two screws G attaching the main board on the
bottom side of the main body. (See Fig.6.)
(3) Disconnect the connector
the CD mechanism assembly and take out the main board
with the rear bracket. (See Fig.6.)
Reference:
Remove the rear bracket from the main body as required. (See
"3.1.5 Removing the rear bracket".)
CN501 on the main board from
C B
Side panel
Fig.4
Rear bracket
E
D
Fig.5
CN501
G
Rear bracket
Fig.6
C
E F
F D
Main board
G
(No.MA216)1-7