Selecting The On-Screen Menu Language; Restoring Default Settings; Transferring Files To A Pc; Maintaining - Insignia NS-DCC5HB09 User Manual

Insignia NS-DCC5HB09 5 MP High Definition Digital Camcorder with 3.0" LCD Monitor

Selecting the on-screen menu language

To select the on-screen menu language:
1 In record mode, press OK to open the record
menu.
2 Press or
menu opens.
3 Press T (up) or W (down) to select
Language. The Language menu opens.
4 Press T (up) or W (down) to select a
language, then press OK to save your
selection and close the menu.

Restoring default settings

To restore default settings:
1 In record mode, press OK to open the record
menu.
2 Press or
menu opens.
to select Setting. The Setting
to select Setting. The Setting
www.insignia-products.com
3 Press T (up) or W (down) to select Default
Setting. The Default Setting menu opens.
4 Press T (up) or W (down) to select Yes. If
you want to cancel the restoration, select No.
5 Press OK to restore settings and close the
menu.

Transferring files to a PC

The PC you connect your camcorder to must
meet the following requirements:
• Windows Vista
2000, Windows
operating system
®
• Pentium III processor with 800 MHz or
above
• 256 MB of memory
• CD drive
• 1 GB free hard drive space
• Available USB 2.0 port
To transfer files to a PC:
1 Connect the mini-USB cable to the USB port
on your camcorder, then connect the other
end to a USB port on a PC. The red LED
lights when your camcorder is connected to
the PC, and your camcorder is in Mass
Storage mode.
2 Open My Computer, then double-click
Removable Disk\DCIM. The files on your
camcorder are displayed. From My
Computer, you can read, delete, move, and
copy any movies, pictures, or voice
recordings on your camcorder.

Maintaining

• Avoid pressing hard on the camcorder body.
• Do not subject the LCD to impact because
the glass may break and fluid may leak from
your camcorder.
• When you store your camcorder for an
extended period or you are not going to use it
soon, remove the batteries. Leakage may
occur that will damage your camcorder.
® ®
, Windows XP, Windows
® ®
Me, or Windows 98SE
®
27