Selecting The Flash Setting For Pictures; Using The Self-Timer For Pictures; Taking A Sequence Of Pictures - Insignia NS-DCC5HB09 User Manual

Insignia NS-DCC5HB09 5 MP High Definition Digital Camcorder with 3.0" LCD Monitor

Selecting the flash setting for pictures

Your camcorder has four flash settings. The flash
setting icon appears on the LCD.
Auto-flash—The flash fires
A
automatically depending on the light
conditions. Use this mode for general
photography.
On—The flash fires for every picture.
Off—Use this mode when flash
photography is prohibited or when the
subject is beyond the range of the
flash. When you turn off the flash, no
flash icon appears on the LCD.
Red-eye reduction—The flash fires
twice right before you take the picture.
Use this mode to help eliminate red
reflection in eyes.
To select the flash setting for pictures:
1 Press (Record/Play) to switch to record
mode.
2 Press OK. The record menu opens.
3 Press or
4 Press T (up) or W (down) to select Flash,
then press OK.
5 Press T (up) or W (down) to select a flash
option, then press OK to save your selection
and close the menu.
Note
You can also press
Note
The flash is disabled when the battery power is
low .
to select Camera Mode.
to change the flash setting.
www.insignia-products.com

Using the self-timer for pictures

When the self-timer is turned on, your
camcorder waits 10 seconds after you press
(Picture Shutter) before it takes the picture.
To use the self-timer for pictures:
1 Press (Record/Play) to switch to record
mode.
2 Press OK. The record menu opens.
3 Press or
4 Press T (up) or W (down) to select Selftimer,
then press OK.
5 Press T (up) or W (down) to select On or Off,
then press OK to save your selection and
close the menu.

Taking a sequence of pictures

When the Multi-snap option is turned on, your
camcorder takes five pictures in rapid sequence.
To take a sequence of pictures:
1 Press (Record/Play) to switch to record
mode.
2 Press OK. The record menu opens.
3 Press or
to select Camera Mode.
to select Camera Mode.
17