Ensure an activated SIM card, from the phone service provider, is installed in the terminal. The default of PT980-II already
has a GPRS connection. You can tap "Start" →"Settings"→"ControlPanel"→"Network and Dial-up Connections", double
clicks the GPRS icon to start the communication if you located in China. If you are not located in China, you should modify
GPRS connection or create a new GPRS connection follow the instruction of telecommunication service provider.
Make New Connection
The steps of make new connection are:
A. Double click the Make New Connection icon as shown in figure 6.1.
B. Naming the connection name as shown in figure 6.2 than tap Next button
Figure 6.1: Make New Connection
C. Selected the "Wireless modem Port" in the field of "Select a mode" as shown in figure 6.3, tap "Configure..." button to
start the configuration.
D. As shown in figure 6.4, change the baud rate value to "115200" and keep other parameter in default value. then tap
"Call Options" page.
24
Chapter 6 Using GPRS Communication
Figure 6.2: Naming the connection