Touch Screen Driver Installation
The M19A-0101 is available with USB connection. The Linux kernel 2.6.x (32 bit & 64 bit) touch
driver can be downloaded at www.touchrev.com. HID for Windows
98.
Please Note:
1. The M19A-0101 is Microsoft
use the USB touch screen interface. No additional software driver is required for general
operation of the touch screen.
2. For M19A-0101, the system requires 15 seconds for Windows 7 to install/uninstall the touch
drivers while turning power on/off or plugging/unplugging USB cable.
M19A-0101 Install Instructions:
If you are using a PC running driver Linux kernel 2.6.x (32 bit & 64 bit),
follow the instructions below:
1. The driver can be downloaded at www.touchrev.com
2. Power on the PC.
3. Be sure the USB cable is connected from the PC to the LCD display.
4. Follow the step-by-step instructions as shown on the pop-up windows.
®
®
Windows
HID (Human Interface Device) compatible if you
18
®
7, VISTA , XP, 2000, ME,
Need help?
Do you have a question about the M19A Series and is the answer not in the manual?