Touch Revolution M19A Series User Manual page 11

5. Take the optional cable cover and screw from the accessory box. Position all cables under
the cover lip as seen in the step 5 diagram.
6. Using a Philips Head screwdriver, insert the screw (CBM M3x6) into the cable cover and
monitor as seen in the step 6 diagram.
7. Re-attach the stand back cover to the LCD stand by pressing firmly until the tabs snap
into place as seen in the step 7 diagram. You may also keep the cables in order by using
the cable organizer.
Step 5
Step 6
Step 7
t
8