Introduction; Notational Conventions - Fujitsu Siemens Computers MCM 153V Operating Manual

Introduction

Your new MCM 153V color monitor possesses a whole range of useful features and functions, e. g.:
•
15" (38 cm) high-resolution CRT (0,28 mm dot pitch)
•
automatic scanning of all horizontal frequencies from 30 to 54 kHz and all refresh rates (vertical
frequencies) from 50 to 120 Hz
•
digital screen controller with microprocessor for storing 26 different display modes
•
VESA-DDC compatibility
•
power management for reducing power consumption by up to 95% when the PC system is not
in use
•
compliance with the latest ergonomic standards (ISO 9241-3)
•
compliance with the recommendations in accordance with MPR II
This Operating Manual contains important information you require to start up and run your monitor.
The monitor interworks closely with the screen controller (graphics card) of your PC. It processes
the data supplied to it by the screen controller. The screen controller/the associated driver software
is responsible for setting the modes (resolution and refresh rate).
Target group
You don't need to be an "expert" to perform the operations described here. Do, however, read the
chapter with the important notes in the Operating Manual of your PC and in this Operating Manual.
In the event of any problems occurring, please contact your sales office or our service center.
Further information
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:
Pay particular attention to texts marked with this symbol. Failure to observe this warning
!
endangers your life, destroys the system, or may lead to loss of data.
This symbol is followed by supplementary information, remarks and tips.
i


Texts which follow this symbol describe activities that must be performed in the order shown.
"Quotation marks" indicate names of chapters and terms that are being emphasized.
A26361-K563-Z100-2-5E19
English - 1