Accessories; Standard Accessories; Optional Accessories - Hitachi DH 40FA Instruction And Safety Manual

WARNING:
Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous
and could cause injury or mechanical damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Case (Molded plastic) (Code No. 313097) ............................................................. 1
(2) Side Handle (Code No. 313078) ............................................................................. 1
(3) Stopper (Code No. 971786) .................................................................................... 1
(4) Allen Wrench 4 mm (Code No. 944458) ................................................................ 1
(5) Allen Wrench 5 mm (Code No. 944459) ................................................................ 1
(6) Hammer Grease A (Code No. 981840) .................................................................. 1
(7) Dust Cover (Code No. 993245) .............................................................................. 1

OPTIONAL ACCESSORIES.....

For accessories in detail please call HITACHI AT 1-800-59-TOOLS
1. Through-hole drilling (Rotation + Hammering)
(1) Drill bit (Spline shank)
External dia.
1/2" (12.7 mm)
1" (25.4 mm)
1-1/2" (38.1 mm)
2. Anchor hole drilling (Rotation + Hammering)
(1) Drill bit
(Taper shank)

ACCESSORIES

sold separately
Overall length
16" (400 mm)
(3) Cotter (Code No. 944477)
(2) Taper shank adaptor
(Spline shank)
Code No.
985374
985375
985376
English
17