■ When operating a power tool outdoors, use an IMPORTANT! extension cord suitable for outdoor use. Use of a It is essential that you read the instructions in this manual cord suitable for outdoor use reduces the risk of electric before assembling, operating, and maintaining the product.
■ Maintain power tools and accessories. Check for power tool. Failure to follow all instructions listed below misalignment or binding of moving parts, breakage may result in electric shock, fire and/or serious injury. of parts and any other condition that may affect the ■...
Page 4
control. An improperly mounted wheel that projects through the plane of the guard lip cannot be adequately protected. ■ Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory ■ The guard must be securely attached to the power could snag your clothing, pulling the accessory into your tool and positioned for maximum safety, so the least body.
the wheel increases the loading and susceptibility ■ When servicing, use only original manufacturer’s to twisting or binding of the wheel in the cut and the replacement parts, accessories and attachments. Use possibility of kickback or wheel breakage, which can of any other parts may create a hazard or cause product lead to serious injury.
Do not use for cutting Use a guard Metal Without force The product is not intended for wet grinding. Using water or other liquid coolants may result in electrocution or With force shock. Do not use for face grinding. Regulatory Compliance Mark (RCM).
Angle Grinder standardised test and may be used to compare one tool with Model R18AG115 another. They may be used for a preliminary assessment of exposure. Voltage 18 V...
Page 16
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 01912701001Q-01...
Need help?
Do you have a question about the R18AG115 and is the answer not in the manual?
Questions and answers