Subscribe to Our Youtube Channel
Related Manuals for WPI PZMIV
Summary of Contents for WPI PZMIV
- Page 1 PZMIV/PZMTIV Precision Zoom Stereo Microscope INSTRUCTION MANUAL Serial No._____________________ 040612 World Precision Instruments...
-
Page 3: Table Of Contents
PZMIV/PZMTIV CONTENTS ABOUT THIS MANUAL ........................1 INTRODUCTION ..........................2 Parts List ............................2 Unpacking ............................2 INSTRUMENT DESCRIPTION ......................3 Setup ..............................4 Adusting a Microscope ........................ 4 System Diagram ........................5 OPERATING INSTRUCTIONS ......................6 MAINTENANCE ............................ 7 ACCESSORIES ............................ - Page 4 World Precision Instruments...
-
Page 5: About This Manual
This symbol indicates a WARNING. Warnings alert you to actions that can cause personal injury or pose a physical threat. Please read these carefully. NOTES and TIPS contain helpful information. Fig. 1—The PZMIV binocular microscope is shown on its standard track stand. World Precision Instruments... -
Page 6: Introduction
INTRODUCTION WPI’s PZMIV stereo microscope is an ideal tool for tissue dissection, cell injection, specimen manipulation, electrode inspection and many other applications requiring a magnified stereo view and ample working distance. It offers quality and performance at an affordable price. Advanced optics provide image sharpness found only among the best of this class. -
Page 7: Instrument Description
**When out, light to the right eyepiece is switched to the photo port Fig. 2—This image identifies the parts of the trinocular PZMTIV. The binocular version (PZMIV) will not have the camera, video/photo port or the light path selector bar. World Precision Instruments... -
Page 8: Setup
Setup Remove the microscope from the case and that the parts are all present and undamaged. See “Parts List” on page 2. Assemble the track stand. Mount the microscope head into the focus mount. Remove the protective cap on the bottom of the microscope head. Refer to the parts diagram (Fig. -
Page 9: System Diagram
Fan Stand 502004 502005 502002 501353 Ring Light Articulated Arm 504134 Fiber Optic Light with Table Clamp: 502007 Boom/Clamp Stand NOVA Optional Wall Mount: 502163 502006 Fig. 3—This diagram shows many of the options available for the PZMIV. World Precision Instruments... -
Page 10: Operating Instructions
OPERATING INSTRUCTIONS Refer to Fig. 2 on page 3 and Fig. 3 on page 5 along with the following instructions on normal operation. Set up the microscope on the track stand. Mount the microscope head into the focus mount. Use focusing knob to bring microscope to focus. Looking through the eyepieces with both eyes, adjust the interpupillary distance by sliding the two eyepiece tubes with both hands until a single image is observed. -
Page 11: Maintenance
PZMIV/PZMTIV MAINTENANCE This instrument should be kept in a cool, dry place free from direct sun, dust, alkali and acid fumes, as well as moisture. Do not disassemble any of the lenses since they have all been properly aligned at the factory. -
Page 12: Accessories
Articulated Arm and Table Clamp w/o Focus Mount (requires 502009 Focus Mount for PZMIV) 502009 Universal Focus Mount for 76 mm PZMIV (Required for BS, AAC, BBS, and BCS) (5/8” pin) 502160 Lighted Fan Base, Fluorescent base, Tungsten Halogen beam 502010 10×... -
Page 13: Specifications
PZMIV/PZMTIV SPECIFICATIONS This unit conforms to the following specifications: Eyepieces ..........................WFH 10X Auxiliary Lenses ..........................1X Zoom Range ........................0.62X – 5X Total Magnification ......................6.2X – 50X Zoom Ratio ............................8:1 Field of View ......................∅33.9- ∅4.2mm Working Distance ........................80mm Binocular Tube ........................ -
Page 14: Appendix: Boom Stand Assembly
APPENDIX: BOOM STAND ASSEMBLY Remove all the parts from the box. Unscrew the hex screw from Vertical Post. The Vertical Post should have a cross block attached to it. Screw Vertical Post and Base together using the hex screw. (Insert the screw from bottom of the base into the threaded section of Vertical Post.) Insert the Horizontal Bar into the... -
Page 15: Warranty
WPI shall not be liable for any damage to data or property that may be caused directly or indirectly by use of this product. - Page 16 International Trade Center, 175 Sarasota Center Blvd., Sarasota FL 34240-9258 Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: sales@wpiinc.com 1 Hunting Gate, Hitchin, Hertfordshire SG4 0TJ Tel: 44 (0)1462 424700 • Fax: 44 (0)1462 424701 • E-mail: wpiuk@wpi-europe.com Germany Zossener Str. 55, 10961 Berlin Tel: 030-6188845 •...
Need help?
Do you have a question about the PZMIV and is the answer not in the manual?
Questions and answers