Using The Shaver - Panasonic ES8253 Operating Instructions Manual

Using the shaver
1
1 Press the 0/1
switch.
• Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver
back and forth in the direction of your beard. You may gently
increase the amount of pressure as your skin becomes
accustomed to this shaver. Applying excessive pressure does
not provide a closer shave.

Pivot action selector
Use to select "SOFT" (soft) or "LOCK" (lock).
You can change the pivot action whether the
shaver is turned on or off.

Using the trimmer
Slide the trimmer handle up. Place
at a right angle to your skin and
move downwards to trim your
sideburns.
4
ES8253_CH.indb 4
90˚
2
2 Hold the shaver as
illustrated above and
shave.
SOFT
LOCK
Cleaning
We recommend that you clean your
shaver with the "sonic" vibration
turbo-cleaning mode when the
faucet symbol
LCD panel.
1. Disconnect the power cord from
the shaver.
2. Apply some hand soap and some
water to the outer foil.
3. Press the 0/1 switch for more than
2 seconds to activate the turbo
mode for "sonic" vibration
cleaning.
• appears on the LCD panel.
• After about 20 seconds, it will be
automatically turned off, or you
can turn it off by pressing the
0/1 switch.
4. Remove the system outer foil and
press the 0/1 switch for more than
2 seconds to activate the turbo
mode for "sonic" vibration cleaning
and clean it with running water.
5. Wipe off any drops of water with a
dry cloth.
6. Remove the system outer foil to
allow it to dry completely.
The mark on the left
is for a washable
shaver and indicates
it can be cleaned
with water.
appears on the
2007/07/24 19:04:53