About The Lcd Panel - Panasonic ES8253 Operating Instructions Manual

Charging
1
1 Insert the appliance plug
into the shaver.
2
2
Plug in the adaptor into a
household outlet.
• The indicators on the LCD panel glow
and charging starts.
• Charging is completed when the
indicators on the LCD panel blink.
(Max. 1 hour later)

Cord shaving
If you insert the appliance plug to the shaver and plug in the
adaptor into a household outlet, you can use it even if the battery
capacity is low.
• If the shaver does not work, continue charging it for approx. 1
minute.
ES8253_CH.indb 3
About the LCD panel
The LCD panel shows the remaining battery capacity from 0% to
100%, in 10% increments.
After charging is
While charging
completed
The indicators
The indicators
blink once every
glow.
second.
During use
min.used
The used time is shown.
• The shown time returns to
[0'00"] after 10 minutes.
When the battery capacity is low
• You can shave 1 to 2 times after "10%" appears.
(This will differ depending on usage.)
"10%" appears and
• A full charge will supply enough power for approx. 14 shaves of
3 minutes each.
10 minutes after
charging is
completed
The indicators blink
once every 2
seconds.
After use
min.used
The used time and the
remaining battery capacity
are shown alternately after
turning off the shaver.
blinks.
3
2007/07/24 19:04:53