Charging
1
1
Insert the appliance plug
into the shaver.
2
2
Plug in the adaptor into a
household outlet.
•
The indicators on the LCD panel glow
and charging starts.
•
Charging is completed when the
indicators on the LCD panel blink.
(Max. 1 hour later)
Cord shaving
If you insert the appliance plug to the shaver and plug in the
adaptor into a household outlet, you can use it even if the battery
capacity is low.
•
If the shaver does not work, continue charging it for approx. 1
minute.
ES8113_CH.indb
3
About the LCD panel
The LCD panel shows the remaining battery capacity from 0% to
100%, in 10% increments.
After charging is
While charging
completed
The indicators
The indicators
blink once every
glow.
second.
When the battery capacity is low
•
You can shave 1 to times after "10%" appears.
(This will differ depending on usage.)
"10%" appears and
•
A full charge will supply enough power for approx. 14 shaves of
3 minutes each.
Using the trimmer
Slide the trimmer handle up. Place
at a right angle to your skin and
move downwards to trim your
sideburns.
10 minutes after
charging is
completed
The indicators blink
once every
seconds.
blinks.
3
2007/07/11
9:23:53