Upper Latch Switch And Monitor Switch Removal; Lower Latch Switch Removal - Sharp R-771 OE Service Manual

UPPER LATCH SWITCH AND MONITOR SWITCH REMOVAL

the outer case.
2. Discharge the high voltage capacitor.
3. Remove the complete control panel assembly, referring
to the Control Panel Assembly and Component Re-
moval.
4. Disconnect the wire leads from the switches.
1. Disconnect the oven from the power supply and remove
the outer case.
2. Discharge the high voltage capacitor.
3. Remove the complete control panel assembly, referring
to the Control Panel Assembly and Component Re-
moval.
4. Disconnect the wire leads from the switch.
HINGE
P L A T E
O V E N L A M P
F I L T E R
T R A Y

LOWER LATCH SWITCH REMOVAL

S T E A M D U C T
R O L L E R SHAF
T U R N T
A B L E
R O L L E R C O V E R
T U R N T A B L E
Figure 8. Oven Cavity Components
5. Remove the single (1) screw and washer holding the
upper latch hook to the oven cavity front flange.
6. Remove the upper latch hook from the flange by moving
it downward.
7. To remove the switch from the upper latch hook, push
outward the two (2) retaining tabs holding the switch in
place.
5. Remove the single (1) screw and washer holding the
lower latch hook to the oven cavity front flange.
6. Remove the lower latch hook from the flange by moving
it downward.
7. Push outward the two (2) retaining tabs holding the
switch in place.
8. The switch is now free.
L O W E R L A T C
M O T O R
19
CHASSIS
S U P P O R T