Setting The Date And Time - Omron BP760 Instruction Manual

SETTING THE dATE ANd TIME

Set the monitor to the current date and time before taking a measurement
for the first time . If the date and time are not set correctly, the
measurement values stored in the memory and the average values may
not be correct .
If the date and time are not set, "-:--" appears during or after
measurement .
The Blood Pressure Monitor automatically stores up to 60 measurement
values with the dates and times . The monitor also calculates weekly
averages for measurements in the morning and in the evening . Morning
and Evening averages are stored for this week and the last seven weeks .
The monitor can also calculate an average reading based on the three
most recent measurements taken within 10 minutes of the last reading .
• If only two readings are stored in the memory for the
NOTE:
10-minute period, the average is based on the two readings .
• If one reading is stored in the memory for the 10-minute
period, this reading is displayed as the average .
19