Conneting Additional Kx Tpa-50 Handsets - Panasonic KX TGP-500 User Manual

CONNETING ADDITIONAL KX TPA-50 HANDSETS

The base unit (KX TGP-500) is supplied with one handset that is already paired. Additional handsets (KX TPA-50)
will need to be paired before use with the base unit.
1. On the Handset, press Menu and dial #
2. Dial the code 1 3 0
3. On the base unit Press and hold the ALL button for at least 4 seconds until the STATUS indicator flashes
in red
On the KX TPA-50 handset, press the OK and wait until the message "Enter Base PIN" is displayed
4.
Dial the base unit PIN ("0000"), and press OK and wait until a long beep sounds.
5.
A successfully connected handset will display a number greater than 1 next to the battery meter located on the top
right corner of the screen. The handset supplied with the KX TGP-500 base unit is by default set to number 1.
Subsequent handset will be allocated a next number in the sequence. You can connect up to a maximum of 6
handsets to a base unit.
/CONNETING ADDITIONAL KX TPA-50 HANDSETS
Figure 4 Panasonic KX TGP-500
5