Watching Tv; Turning On The Power; Turning Off The Power; Simple Button Operations For Changing Channels - Sharp Aquos LC-42BX5H Operation Manual

Watching TV

Turning on the power

Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power "ON" by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
POWER indicator

Turning off the power

Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
POWER indicator
Off Power off
Red The TV is in standby mode.
Green The TV is on.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
POWER button
POWER button
Simple button operations for
changing channels
You can change channels in several ways.
Using CH r / s on the remote control unit
• Press CH r to increase the channel number.
• Press CH s to decrease the channel number.
NOTE
• CH r / s on the TV operates the same as CH r / s on
the remote control unit.
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
Channel display
Channel display changes approximately after 3
seconds as shown below.
(Example)
SAT.1
12
PAL
B/G
SAT.1
12
MONO
13