Adjusting The Height Of The Remote (Only For Swing-Away Remote Holders); Swivelling The Remote To The Side; Adjusting The Height Of The Armrests; Adjusting The Width Of The Armrests - Invacare Fox User Manual

Invacare® Fox™
6.2.2 Adjusting the height of the remote (only for
swing–away remote holders)
Requirements:
•
1 x 6 mm Allen key
Loosen the Allen screw A.
1.
2. Adjust the remote to the desired height.
3. Re-tighten the Allen screw.

6.2.3 Swivelling the remote to the side

If your mobility device is fitted with a swing-away remote bracket,
then the remote can be moved away to the side, for example, to
drive up close to a table.
26

6.3 Adjusting the height of the armrests

Loosen the wing screw A.
1.
2. Set the armrest to the desired height.
3. Re-tighten the wing screw.

6.4 Adjusting the width of the armrests

Requirements:
•
Allen key 8 mm
1577074-A