Specifications; Preset Signals - Sony VPL-HW15 Operating Instructions Manual

Specifications
System
Projection system
SXRO panel, I lens, projection system
LCD panel
0.61-inch (15.4 mm)
SXRO panel 6,220,800 pixels
(2,073,600 pixels x 3)
Lens 1.6 times zoom lens (manual)
f=18.5 mm to 29.6 mm
F2.50 to F3.40
Lamp
200 W Ultra High Pressure Lamp
Projection picture size
40 inches to 300 inches (1,016 mm to
7,620 mm) (measured diagonally)
Color system
NTSC3.58/PAL/SECAMI
NTSC4.43/PAL-MlPAL-NIPAL60
system, switched automatically/
manually (PAL60 system not
switched manually)
Acceptable video signals
15 kHz RGB/component 50/60 Hz,
Progressive component 50/60 Hz,
480/60i, 576/50i, 480/60p, 576/50p,
nO/60p,nO/50p, 1080/60i, 1080/50i,
1080124PsF (48i), 1080/60p (HOMI
input only), 1080/50p (HOMI input
only), 1080/24p (HOMI input only),
Composite video, Y/C video
Acceptable computer signals
fH: 19 kHz to 12 kHz
tV: 48 Hz to 92 Hz
Maximum resolution 1,920 x 1,080
(HOMI input only)
For details, see "Preset Signals".
(iF
page 12)
Input
Video input
VIDEO: phono type
Composite video: I Vp-p±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin type
Y (luminance): 1 Vp-p±2 dB sync
negative (75 ohms terminated)
C (chrominance): burst 0.286 Vp-p ±2
dB (NTSC)
(75 ohms terminated), or
burst 0.3 Vp-p±2 dB (PAL)
(75 ohms terminated)
70
Y PB/CB PRICR
Component: phono type
Y with Sync: I Vp-p±2dB sync
negative (75 ohms terminated)
PB/CB: 0.7 Vp-p±2dB (75 ohms
terminated)
PR/CR: 0.7 Vp-p±2 dB (75 ohms
terminated)
HDMI
Digital RGB/Y CB (PB) CR (PR)
INPUT A
HD D-sub 15-pins
Analog RGB/component:
R/CR (PR): 0.7 Vp-p±2 dB
(75 ohms terminated)
G: 0.7 Vp-p±2 dB
(75 ohms terminated)
G with sync/Y: I Vp-p±2 dB sync
negative (75 ohms terminated)
B/CB (PB): 0.7 Vp-p±2 dB
(75 ohms terminated)
SYNC/HD: Composite sync input:
TTL level, positive/ negative
Horizontal sync input: TTL level,
positive/negative
VD: Vertical sync input: TTL
level, positive/negative
REMOTE
RS-232C: D-sub 9-pins (female)
General
Dimensions
407.4 mm x 179.2 mm x
463.9 mm (16
1
/ 8
x 7
1
/ 8
x 18
3
/ 8
inches) (w/hld)
Mass Approx. 10 kg (22 Ib I oz)
Power requirements
AC 100 V to 240 V, 3.0 A to 1.3 A,
50/60 Hz
Power consumption
Max.300W
Standby mode: 8 W
Standby mode (low): 0.5 W
Operating temperature
5°C to 35°C (41°F to 95 OF)
Operating humidity
35% to 85% (no condensation)
Storage temperature
-20 °c to +60 °c
(-4
OF to + 140 OF)
Storage humidity
10% to 90%