Sony VPL-HW15 Operating Instructions Manual page 66

3
Loosen the screw on the lamp
cover with a Philips screwdriver,
and then open the lamp cover.
4
Loosen the 3 screws on the
lamp with the Phillips
screwdriver. Hold up the handle,
then pull the lamp straight out.
66
5
Hold the handle of the new lamp
and push it in securely until it
reaches the end, and then
tighten the 3 screws.
1m
Be careful not to touch the optical block
inside the unit.
6
Close the lamp cover, then
tighten the screws.