Sony UP-895 Service Manual page 16

Location and Function of Parts
qa OPEN button (26, 31)
Opens or closes the door. Also, interrupts printing
midway.
When the door is open, you can see the slide
switches in the paper tray.
SHARPNESS GAMMA PAPER TYPE SMOOTHING
OFF OFF ON
1 2 3 4
1 SHARPNESS switch
Adjusts the sharpness of the printout.
2 GAMMA switch
Sets the tone of the printouts (density gradation).
3 PAPER TYPE switch
Selects the paper type.
4 SMOOTHING switch
Selects the line density.
For detailed information on slide switches, see
"Setting the Slide Switches on the Paper Tray" on
page 22.
qs Paper feeder and cutter
Cuts the printing paper.
36 Others
Back
1 Equipotential terminal (only for UP-895MD/
895CE)
Used to connect to the equipotential plug to bring the
various parts of a system to the same potential.
Refer to "Important safeguards/notice for use in the
medical environments" on page 20.
2
REMOTE connector (22, 30)
Connect the RM-91 remote commander or the foot
switch for controlling print operation from a
distance.
3 DIP SW (switches) (23)
Sets the print modes and functions.
4 tVIDEO IN (input) connector (BNC type) (22)
Connect to the video output connector of the video
equipment.
5 TVIDEO OUT (output) connector (BNC type)
(22)
Connect to the video input connector of the video
monitor. The output signal type depends on DIP
switch 8 (OUTPUT).
6 -AC IN (AC power input) connector (22)
Connect to a wall outlet using the AC power cord
supplied with the unit.