Table of Contents
Advertisement
VIDEO LEVEL
This item is used to select the monitor's input signal level. The normal
level used for most PC's is 0.7V. After highlighting this icon, press the
enter button. Select the desired level with the adjustment control to
highlight the desired level. Press the enter way when done
? ?
OSD
v i d e o
l e v e l
0 . 7 V
1 . 0 V
e n t e r :
s e l e c t :
OSD
OSD ADJUST
This item lets you adjust the OSD position and size. After selecting
the OSD icon using the Adjustment Control, push the Enter Button.
The OSD will be displayed as shown below. Select an icon using the
Enter Button. Rotate the Adjustment Control to modify existing posi-
tion or size. Press Enter when done.
? ?
? ?
OSD
OSD
a d j u s t
a d j u s t
OSD
OSD
s e l e c t :
m a i n
:
e n t e r :
s e l e c t :
For example, if the selected signal input is BNC in D-SUB, the picture
is muted and in DPM for a few second. Then if a micom confirms the
input signal jack, the input signal searches for D-SUB again so that
the picture is automatically displayed.
When this icon is selected, the OSD appears as shown below.
This message indicates the monitor is on processing even though you
are away for some time due to another matter. The message does not
disappear until you click the enter key again.
14
Advertisement
Table of Contents
