Advertisement
English
Warning
• Do not lean the screen case against a wall.
If the screen case falls, it may cause to injury. When you store the screen
case, place it on a flat surface.
• Do not place the screen near a device used to produce flames such as a
fireplace, a gas range, or an oil heater, etc.
The screen surface is made from a thin material. It may catch a fire from
a device producing flames.
Caution
• Do not touch both edges of the screen surface.
The screen surface is made from a thin material. If you touch the edges
and rub the screen surface, it may cause an injury such as cuts.
• Do not place the screen near a windy place.
If you place the screen near an air conditioner, fan or a window, the
screen may fall. This may cause an injury.
This may cause the projected image to sway as well.
• Do not place the screen on an unstable surface.
If you place the screen on an unstable surface such as an unsteady rack
or shelf, the screen may fall. When you install the screen, adjust the
stands in a vertical position against the screen case.
• When you adjust the height of the screen or store the screen, be sure to
unlock the screen pole by holding it with your hand.
If you unlock the screen pole without holding it, the moving part on
the upper part of the screen pole may drop quickly. This may cause an
injury or damage to the screen, such as a handle distortion.
• Do not hang from the screen.
If you hang from the screen surface or the screen pole after the
installation of the screen, it may fall and cause an injury.
• Do not wind in or catch your finger when storing the screen.
Be careful not to wind in your finger when storing the screen surface. Also,
be careful not to catch your finger when storing the screen pole or stands.
Precautions
Installation of the screen
When installing the projector on a ceiling, a clear and optimum image may
not be projected, due to the features of the projector.
For details on installation, refer to "Example of installation position" of this
operating instruction.
Advertisement
