Step 4 : Setting Up The Dvd-Vcr With The Auto Set Up Function - Sony SLV-D910AZ Operating Instructions Manual

Step 4 : Setting up the DVD-VCR with the
Auto Set Up function
Before using the DVD-VCR for the first
time, set up the DVD-VCR using the Auto
Set Up function. With this function, you can
set TV channels automatically.
1
Turn on your TV and set it to the video channel.
Tune the TV to channel 68 (in Australia) or 63 (in New Zealand) (the initial
RF channel for this DVD-VCR). Refer to your TV manual for TV tuning
instructions. If the picture does not appear clearly, see "To change the RF
channel" on page 14.
2
Connect the mains lead to the mains.
The DVD-VCR automatically turns on and the
"SYSTEM SELECTION" menu appears.
Setting up the DVD-VCR with the Auto Set Up function
SET UP
V/v/B/b
ENTER
SYSTEM SELECTION
SYSTEM - B/G (NEW ZEALAND)
SYSTEM - D/K
SYSTEM - I
SYSTEM - B/B (AUSTRALIA)
V v
ENTER RETURN SET UP
continued
13