Table of Contents
Advertisement
To use the Auto Tape Speed function
In step 3 above, press v to select "Auto". When you are recording a programme in
the SP mode and the remaining tape length becomes shorter than the recording time,
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the "Tape Select" setting in the "VIDEO SETUP" menu must be
accurate (see page 94).
Tips
• To set the line input video source, you can also use the INPUT SELECT button.
• To check, change, or cancel the programme setting, see "Checking/changing/cancelling timer
settings" on page 46.
Note
• The
indicator flashes in the display window when you press ?/1 with no tape inserted.
To watch another TV programme after setting the timer
1
If the TV is connected to the DVD-VCR using an audio/video cable, set the TV to
TV input. If the TV is connected to the DVD-VCR using only the aerial cable,
skip this step.
2
Select another programme position on the TV.
Tips
• To set the channel, you can also use the V/v or number buttons.
• If the
indicator appears, this means that the VCR is currently recording this programme.
• You can also do the following tasks while the VCR is recording:
– Reset the counter (page 34).
– Display tape information on the TV screen (page 36).
Recording TV programmes using the timer
41
Advertisement
Table of Contents
