Table of Contents
Advertisement
To set the clock
1
Hold down EASY TIMER so that DAY indicator appears in the display window.
However, if the clock has already been set, the current setting appears.
2
Turn EASY TIMER to set the day.
3
Press EASY TIMER.
MONTH indicator appears in the display window.
4
Turn and press EASY TIMER to set the month and then the year.
After you set the year, "CLOCK" appears in the display window.
5
Turn and press EASY TIMER to set the hour and minute.
6
When you have finished setting the time, press EASY TIMER to start the clock.
Tips
• To cancel an Easy Timer setting, press any button other than EASY TIMER or PROGRAM
+/– on the unit or any button on the remote while you are making the setting.
• To check, change, or cancel the programme setting, see "Checking/changing/cancelling timer
settings" on page 46.
Notes
• If six programmes have already been set using the manual timer setting, "FULL" appears in
the display window for about five seconds.
• If you are setting the clock for the first time or "0:– –" appears in the display window, you
cannot set the clock to February 29
• The timer indicator flashes in the display window when you complete the setting in step 11
on page 44 with no tape inserted.
• When the setting time is incorrect, "Error" appears in the display window in step 11 on
page 44. Set the timer again from step 1.
About the Demonstration Mode
The Easy Timer function has a Demonstration Mode that allows the user, such as a
salesperson, to enter more than six examples of timer settings when demonstrating
the use of EASY TIMER. It cancels the FULL notice which appears if six
programmes have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
To activate the Demonstration Mode
Press X on the unit while turning EASY TIMER. "DEMO" appears in the display
window for a few seconds.
To cancel the Demonstration Mode
Turn the power off and unplug the mains lead. Although the Demonstration Mode is
cancelled, the timer settings entered while using the Demonstration Mode will
remain. Be sure to manually cancel the timer settings before you use EASY TIMER
or any other timer method after reconnecting the mains lead (page 46).
th
using EASY TIMER. Set the clock manually.
Recording TV programmes using EASY TIMER
45
Advertisement
Table of Contents
