Other Functions; -Eq7Tune; System Menu - Sony MEX-R5 Operating Instructions Manual

•
34
Other functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader
and subwoofer volume.
ATT OVD
DtED
1
Select a source, then press C
souND)
repeatedly to select the desired item.
The item changes as follows:
BAS
(bass)_...
TRE
(treble)_...
BAL (left-right) _... FAD (front-rear) _...
SUB
(subwoofer volume)*
*
"r x >' ' is displayed at the lowest setting, and can be
adjusted up to 20 steps.
2 Press ~~-... repeatedly to adjust the
selected item.
After
3
seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the main unit
In step 2, to adjust the selected item, press the volume
+1- button.
Adjusting the equalizer curve
-EQ7Tune
You can adjust and store the equalizer settings
for different tone ranges.
ATT OVD
D tED
1
Select a source, then press
( SYSTEM M ENU ) •
2
Press
tt,J.
repeatedly until " EQ7
TUNE" appears, then press
cENTER) .
3
Press ~~-... repeatedly to select the
desired equalizer type, then press
(ENTER).
4
Press
~~-...
repeatedly to select the
desired frequency.
The frequency changes as follows:
62Hz -... 157Hz -... 396Hz -... 1kHz -...
2.5kHz -... 6.3kHz-... 16kHz
5
Press
tl.J
repeatedly to adjust the
desired volume level.
The volume level is adjustable in 1 dB steps,
from -10 dB to +10 dB.
OODIGITAL
52
~~~
+8
Repeat steps 4 and 5 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (
ENTER).
6
Press (
ENTER) .
The setting is complete and the display
returns to normal play/reception mode.