Technics SL-PI 200 Operating Instructions Manual page 13

2-3. To play a disc from a specific
starting time
I For example, to play from the 2 min.
38.7 sec. point of track
q
.
2 min. 38.7 sec.
I
.----------__________________
b
Specify
track no.
5
In
4
separate
track from
minutes
*
Dl
(Note 1)
-c
Specify
minutes
2
nol
+
:eparate
ninutes
,,,,,
I
+
+
I
!
1
I
I
1
1
1
I -
+
*When the play button is pressed, disc play begins
from the 2 min. 38.7 sec. point of track 5.
Note 1)
When no minutes are to be specified, for example, if
play is to begin at the 38.7 sec. point of track 5, press
the numeric button "0" or press the asterisk button
twice in a row, as shown below.
*An already specified time will be cancelled when a
new time is entered or the clear button is pressed.
*If the starting time is specified while the unit is in the
pause mode, press the pause button once and then
press the play button to resume play.
Not pressing the pause button will cause a short
delay before sound is heard.
f \
Restarting play from the same point
of time
(By means of starting time
confirmation.)
-Press the time recall button during play.
*The starting time is shown for about 20 seconds on the
display panel. During that time play continues.
I I
elf the play button is pressed during that time, play begins
again from the location indicated on the display.
\
/
-13-