Input Source Adjustments - Zenith IQB42P97G Installation / Operating Manual | Warranty

Input Source Adjustments

Setting must be done when connecting a color difference signal to the Component Video terminal.
In COMPONENT VIDEO mode, press the MENU
1
button.
With the ADJUST button, select Source.
2
Set by pressing the SET button, select
3
Component Video.
Press the SET button again to select
4
Component Video or Clamp Pulse as below.
COMPONENT VIDEO
• Component Video and Clamp Pulse are set
for Component Video mode. Video System
can be set for Video mode and S-Video
mode.
Select Mode with the ADJUST button.
5
• Mode 1: Use this mode for normal usage
such as DVD, Betacam or other standard
component video signals.
• Mode 2: Use this mode only for Muse signal
(Hi-Vision - Japanese high definition video
signal)
P A G E 2 2
CLAMP PULSE
VIDEO MENU
COMMON SETTINGS
PICTURE
POSITION/SIZE
SOURCE
OTHERS
MENU QUIT SET ENTER
SELECT
COMPONENT VIDEO
MODE 1/MODE 2
MENU NEXT
RETURN SET
SELECT
COMPONENT VIDEO
MODE 1/ MODE 2
MENU RETURN SET NEXT
SELECT
206-3524-O