Back Panel Connections - Zenith IQB42P97G Installation / Operating Manual | Warranty

Back Panel Connections

AUDIO VIDEO
INPUT INPUT
R L
Audio input ter-
Video input ter-
minals (AUDIO
minal (VIDEO
INPUT)
INPUT)
Connects to the
Connects to the
audio output ter-
video output ter-
minal of a video
minal of a video
deck or similar
deck or video disc
device.*
player.*
*May require BNC to RCA adapters from your local electronics dealer.
P A G E 6
S-VIDEO CONPONENT
INPUT VIDEO INPUT
S video input
Component
terminal
video input ter-
(S-VIDEO
minal (COMPO-
INPUT)
NENT VIDEO
Connects to the
INPUT)
S video output
Connects to the
terminal of a
component video
video deck or
output terminal
video disc play-
of DVD and simi-
er.
lar devices.
SYNC
SW
RGB
TTL
INPUT
ANALOG
(75Ω)
Sync switch (SYNC
SW TTL/ANALOG (75
Ω)
For switching the RGB
terminals' 13-pin hori-
zontal sync and 14-pin
vertical sync to termi-
nate with 75 Ω.When
an analog synchronous
signal is input at the
RGB terminal, be sure
that this switch is set
to ANALOG (75 Ω).
For connection to a
personal computer, be
sure it is set to TTL.
RS-232C
RGB input ter- Power input terminal
minal (RGB • Firmly insert the
INPUT) accessory power cord
Connects to the as far as it will go
computer moni- into the power input
tor's (analog RGB terminal.
output terminal. • Firmly push the
Cables connect- power cord plug as
ing the personal far as it will go into
computer vary the power socket.
according to the (100-240 VAC)
type of machine,
so consult your
product dealer.
206-3524-O