Basic Tv Setup And Operation; Turning The Tv On/Off; Selecting The Menu Language; Selecting The Main Picture Input Source - Zenith C27V36 Installation And Operating Manual, Warranty

Basic TV Setup and Operation

Before operating your TV, make sure the TV has been connected to an antenna or cable system and the
TV is plugged into a power outlet.

Turning the TV On/Off

The set switches to standby mode and the standby indicator lights red.
To switch the TV on from standby mode, press the on/off, tv/video,
ch+/- button on the set or tv/video, ch+/-, comp/dvi, power or
number button on the remote control.
A channel number will be displayed on the screen. The on-screen
display will disappear after a few seconds.
Press the power button on the remote control or the set. The TV
reverts to standby mode.

Selecting the Menu Language

1. Press the menu button and then use
Special menu.
G
2. Press the and then use
G
3. Press the and then use
language.
From this point on, the menus will appear in the language you
selected.
4. Press the exit button to save and return to TV viewing.

Selecting the Main Picture Input Source

Changes the picture source for the main screen so you can watch
your off-air TV, cable TV, VCR, DVD, or any other devices that are
connected to your TV.
Using the tv/video button
1. Repeatedly press the
,
,
Using the comp/dvi button
1. Repeatedly press the
or
Using the button
menu
1. Press the menu button and then use
Special menu.
G
2. Press the and then use
G
3. Press the and then use
,
.
F
4. Press the button to exit.
D
D / button to select
E
D / button to select the desired
E
tv/video
button to select
, ,
comp/dvi
button to select
.
D
D / button to select
E
D / button to select
E
, ,
/ button to select the
E
.
, ,
or .
/ button to select the
E
.
,
9
CH.
/
CH.
,
/
,
or