Twin Picture Function; Twin Picture Mode - LG MU-60PZ10 Owner's Manual

Twin picture mode

- As the name suggests, this mode splits the screen into 2, allowing 2 sources to be shown on
the monitor screen at the same time. Each source is given half the screen.
- Select RGB input source.
- This function works only in the following resolutions;
DTV 480p/720p/1080i,
- With TWIN PICTURE active, not all picture formats can be used for the main/sub picture.
twin picture
28
RGB 640x480 (only in Vertical frequency 60 Hz)
Press the twin picture button.
• Each time you press
select ON or OFF .
DW F ON
<ON>
DW OFF
F
<OFF>
twin picture vol
or buttons, you can
Main picture
Sub picture
G
• To avoid a permanent
image being burned into
the screen, the sub picture
will move every 2 hours.
:Center
Downside
• The sub picture starts in
the center position and
G
then moves as described
above.
• You may notice a small
amount of video noise at
the bottom or top of the
sub picture. This is normal.
Upside
Center