Page 1
PLASMA MONITOR OWNER’S MANUAL MODELS:MU-50PZ90M/90V MU-50PZ90MA/90VA MU-50PZ90MB/90VB MU-50PZ90MK/90VK MU-50PZ90MR/90VR MU-50PZ90MS/90VS Please read this owner’s manual carefully before operating the Monitor. Retain it for future reference. Record model number and serial number of the Monitor. See the label attached on the back of the Monitor and quote this information to your dealer when you require service.
Warning arning arning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Safety Instruction Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential elec- trical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference.
Page 4
Safety Instruction Safety Instructions continued Safety Instructions continued (Continued from previous page) 14. Outdoor Antenna Grounding 18. Object and Liquid Entry If an outside antenna or cable system is connected to the Never push objects of any kind into this product through product, be sure the antenna or cable system is grounded so openings as they may touch dangerous voltage points or as to provide some protection against voltage surges and...
Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? If voltage is inputted to gas in glass panels, ultraviolet rays is outputted and fused with a fluorescent substance. At this moment, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160°...
Instruction Controls Controls Front Panel Controls Front Panel Controls ON/OFF Buttons Main Power Button INPUT SELECT Button VOLUME ( ) Buttons MENU Button Remote Control Sensor Power Standby Indicator Illuminates red in standby mode, Illuminates green when the Monitor is turned on Connection Options Connection Options Back Connection Panel...
POWER STOP P/STILL PLAY WIN.POSITION VCR BUTTONS Moves the sub picture. WIN.SIZE WIN.POSITION SPLIT ZOOM Controls a LG video cassette SPLIT ZOOM recorder. ZOOM - Enlarge the screen with regular ZOOM + ration. ZOOM-/ZOOM+ Enlarges or reduces the main picture size.
Installation Installation Installation Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. POWER SLEEP INPUT SELECT DASP PIP ARC TWIN PICTURE SWAP SUB INPUT MENU MUTE 1.5V...
Page 10
Installation Installation Instructions continued Installation Instructions continued Desktop Pedestal Installation Desktop Pedestal Installation For proper ventilation, allow a clearance of 4” on each side and the top, 2.36” on the bottom, and 2” from the wall. Detailed installation instructions are included from your dealer in the optional Desktop Stand Installation and Setup Guide.
Installation External Equipment Connections External Equipment Connections NOTE: Not all depicted cables are included with the plasma display. VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor - Use the orbiter function to Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still pic- ture from a VCR.
Installation External A/V Source Setup External A/V Source Setup How to connect 1. Connect the provided BNC-RCA adapter to the monitor’s VIDEO INPUT. 2. Connect the audio and video cables between the external (MONO) AUDIO AUDIO equipment's output jacks and the monitor input jacks, as AUDIO INPUT S-VIDEO VIDEO INPUT...
Installation PC Setup PC Setup This plasma display provides Plug and Play capability, meaning that the PC adjusts automatically to its settings. The plasma dis- play sends configuration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol.
Operation Operation Operation urning on the Monitor urning on the Monitor Turning on the Monitor just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode.
Operation ideo Menu Options ideo Menu Options - Each adjustment for video menu options doesn’t effect other input source. Readjust Video menu for each following mode. : RGB (PC) / DVI (DVI), : RGB (DTV) / DVI (DTV) / Component (480p, 720p, 1080i) : Video / S-Video / Component (480i) APC (Auto Picture Control) APC (Auto Picture Control)
Operation Audio Menu Options Audio Menu Options DASP (Digital Auto Sound Processing) DASP (Digital Auto Sound Processing) - This function lets you enjoy the best sound without any special adjustment because the Monitor automatically selects the appropriate sound option based on the program content. - When adjusting sound options (treble, bass, and balance) manually, DASP automatically changes to User 1.
Operation ime Menu Options ime Menu Options Setting the Clock Setting the Clock - If current time setting is erased by a power failure, if TV is unplugged or if the monitor is turned off with ON/OFF button on the monitor, reset the clock. 1.
Operation Special Menu Options Special Menu Options Key Lock Key Lock - The monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing. - This Monitor is programmed to remember which option it was last set to even if you turn the monitor off. 1.
Operation Screen Menu Options Screen Menu Options Auto Adjustment Auto Adjustment - RGB (PC) mode only; This function doesn’t work in RGB-DTV. - Automatically adjusts picture position and minimizes image shaking. - If the image is still not correct, your Monitor is functioning properly but needs further adjustment. - The and the can be adjust automatically for DVI mode.
Operation Split Zoom Split Zoom - Enlarges the picture in correct proportion. - Split Zoom can be used for every input source. - with 2-SPLIT ZOOM, you can only move the screen into upside or downside. - If a screen is enlarged, a screen can move without selecting section of screen Split Zoom. 1.
Operation Screen Menu Options continued Screen Menu Options continued Screen Adjustments (V ideo, S-V ideo and Component 480i mode only) Screen Adjustments (V ideo, S-V ideo and Component 480i mode only) - Use this function to correct jittering or picture instability while viewing a video tape. 1.
Operation (Picture-In-Picture) Feature (Picture-In-Picture) Feature - PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image. - When you select PC or DTV for main picture in PIP, you can watch VIDEO, S-VIDEO or COMPONENT 480i for sub picture. Size Size atching PIP...
Operation win Picture Setup Option win Picture Setup Option - As the name suggests, this mode splits the screen into 2, allowing 2 picture sources to be shown on the monitor screen at the same time. Each source is given half the screen. Main Picture Size Adjustment Main Picture Size...
External Control Device Setup External Control Device Setup External Control Device Setup - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. - Connect the serial port of the control device to the RS-232C jack on the Monitor back panel. - RS-232C connection cables are not supplied with the Monitor.
Page 26
External Control Device Setup OK Acknowledgement Command Reference List Command Reference List [Command2][ ][Set ID][ ][OK][Data][x] COMMAND 1 COMMAND 2 DATA (Hexadecimal) * The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the 01.
Page 27
External Control Device Setup 03. Aspect Ratio (Command:c) (Main picture format) 07. Contrast (Command:g) G To adjust screen contrast. G To adjust the screen format. You can also adjust contrast in the Video menu. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Transmission Special menu.
Page 28
External Control Device Setup 11. Sharpness (Command2:k) 16. PIP Position (Command2:q) G To adjust the screen sharpness. G To select sub picture position for PIP. You can also adjust sharpness in the Video menu. You can also adjust the sub picture position using WIN.POSITION on the remote control or in the Special menu.
Page 29
External Control Device Setup 21. Red Adjustment (Command2:v) Acknowledgement G To adjust red in color temperature. [z][ ][Set ID][ ][OK][Data][x] * This function is “read only”. Transmission [k][v][ ][Set ID][ ][Data][Cr] 26. Orbiter (Command2:p) Data Min: 0 ~ Max: 64 G To control the orbiter function on/off.
IR Code IR Code (NEC Format) IR Code (NEC Format) How to connect How to connect G Connect your wired remote control to the Remote port on the Monitor. Set the CONTROL LOCK to ‘ON’ on the Monitor back panel to operate Monitor with wired remote control. Remote Control IR Code (NEC Format) Remote Control IR Code (NEC Format) G Output waveform...
Page 31
IR Code Code (Hexa) Function Note UP ( R/C Button DOWN ( R/C Button VOL+ ( R/C Button VOL- ( R/C Button POWER On/Off R/C Button (Power On/Off) POWER ON Discrete IR Code (Only Power On) POWER OFF Discrete IR Code (Only Power Off) MUTE R/C Button Number Key 0...
Troubleshooting Checklist roubleshooting Checklist roubleshooting Checklist • Check whether the Monitor is turned on. No picture & • Power cord inserted into wall outlet? No sound • Test the wall power outlet, plug other product’s power cord into the wall outlet where the Monitor’s power cord was plugged in.
Maintenance & Specification Maintenance Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new Monitor. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Cleaning the Screen 1.