Installation Diagram Of Indoor And Outdoor Units - Toshiba RAS-24GKHP-ES2 Service Manual

8-2. Installation Diagram of Indoor and Outdoor Units

6 Bio enzyme & Gingko filter
5 Sasa Zeolite Vitamin C filter
Before installing the
wireless remote control
• With the remote control cover
open, load the batteries supplied
correctly, observing their polarity.
2
Wireless remote control
Cover
3
Batteries
18 Class
8 Pan head wood screw
4 Remote control holder
2
Wireless remote control
Vinyl tape
Apply after carrying
out a drainage test.
Extension drain hose
(Not available,
provided by installer)
24 Class
- 32 -
FILE NO. SVM-06020
For the rear left and left
piping
Hook
1 Installation
plate
Insert the cushion between
the indoor unit and wall,
and lift the indoor unit for
better operation.
Do not allow the drain
hose to get slack.
Shield
pipe
Make sure to run the drain
hose sloped downward.
The auxiliary piping can
be connected the left, rear
left, rear, right or bottom.
Right
Rear
Insulate the refrigerant
pipes separately with
insulation, not together.
Saddle
Extension
drain hose
(Not available,
provided by
installer)
Wall
Cut the piping
hole sloped
slightly
Rear
left
Left
Bottom
6 mm thick heat resisting
polyethylene foam