Powering Off The Projector - InFocus X6 Reference Manual

Powering Off the Projector

1. P ress the "Power/Standby" to turn off the projector lamp,
you will see a message as below on the on-screen display.
2. P ress the "Power/Standby" again to confirm.
3. T he cooling fan continues to operate for about 120 seconds
for cooling cycle and the Power LED will flash blue. When
the light starts flashing, the projector has entered standby
mode.
I f you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
entered standby mode. Once in standby mode, simply press
"Power/Standby" to restart the projector.
4. D isconnect the power cord from the electrical outlet and the
projector.
5. D o not turn on the projector immediately following a power
off procedure.
Operation
 ... English