InFocus X6 Reference Manual page 11

Introduction
English ... 0
5 Keystone
Correction
6 Source
7 Menu
8 AV-Mute
9 Reset
10 Video 1 Source
(S-Video)
11 Video 2 Source
(Composite)
12 Digital Zoom
13 Enter
14 Re-Sync
15 Four
Directional
Select Keys
16 Source Lock
17 Volume -/+
Adjust the image to compensate
for distortion caused by tilt-
ing the projector (vertical ± 15
degrees).
Press "source" to choose RGB,
Component, S-Video, Composite
and HDTV sources.
Press "menu" to launch the On-
screen display (OSD) menu, back
to the top level of OSD menu for
the OSD main menu operation
Momentarily turn off/on the
audio and video.
Change the adjustments and set-
tings to the factory default
value.
Press "video 1" to choose video 1
connector.
Press "video 2" to choose video 2
connector.
Zoom the projector display in or
out.
Confirm your section of items in
sub menu operation.
Automatically synchronize the
projector to the input source.
Use up, down, left, right s to
select items or make adjustments
to your selection.
Press "source-lock" to lock speci-
fied connection port; press this
again to unlock.
Increase/decrease speaker vol-
ume.