Powering The Projector On / Off; Powering On The Projector - InFocus INL14*UST User Manual

When the power

mode is in standby
mode (power con-
sumption < 0.5W),
the VGA output/
input and audio
will be deactivated
when the projector
is in standby.
 Turn on the
projector first and
then select the
signal sources.

Powering the Projector On / Off

Powering On the Projector

1. Securely connect the power cord and signal cable. When
connected, the POWER/STANDBY LED will turn Red.
2. Turn on the lamp by pressing " " button either on the pro-
jector or on the remote. The POWER/STANDBY LED will
turn Blue.
The startup screen will display in approximately 10 sec-
onds. The first time you use the projector, you will be asked
to select the preferred language and power saving mode.
3. Turn on and connect the source that you want to display
on the screen (computer, notebook, video player, etc). The
projector will detect the source automatically. If not, push
the menu button and go to "Options".
Make sure that the "Source Lock" has been set to "Off".
If you connect multiple sources at the same time, press the

"INPUT" button on the control panel or direct source keys
on the remote control to switch between inputs.
POWER/STANDBY
1
Installation
13
English