can also be done using RCVKBT.EXE by specifying the file name as a
parameter.
During transmission of tables no keyboard activity is allowed, such as key
presses or key position change otherwise the transmission will be disturbed.
Files for Programming
The files are available on our Internet site www.wincor-nixdorf.com. The
not included in the scope of delivery:
following files is
KBUTI.EXE
KBUTIHLP.HLP
SENDKBT.EXE
RCVKBT.EXE
KB2DEF.EXE
KBCHKDEF.EXE
TA60DEF.KBT
README.TXT
Programming the keyboards TA60 is described in detail in the Readme file.
Useful hints
Programming keyboards by tables allows a very flexible keyboard layout.
However, one should have some thought about the task of a technician in
the field. From logistics point of view it has to be ensured that:
Spare keyboards are delivered always loaded with customer specific tables
with starting the system the tables are loaded automatically
Dialogue utility for programming the keyboard
Help file fot the dialogue utility
To send a keyboard table from a file to the keyboard
To receive a keyboard table and save it in a file
To reset a keyboard to the default state
To check for default state (default or programmed)
Default keyboard table for TA60 (!)
Readme file for programming the keyboard
FILES FOR PROGRAMMING
17