Manufacturer's Declaration And Approval; General Authorization; Fcc-Class A Declaration; Recycling The Ta60 - Wincor Nixdorf TA60 User Manual

Manufacturer's Declaration and Approval

General Authorization

This device fulfills the requirements of the EEC standards
89/336/EEC "Electromagnetic Compatibility" and 73/23/EEC
"Low voltage Directive".
Therefore, you will find the CE mark on the device or packaging.

FCC-Class A Declaration

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
Modifications not authorized by the manufacturer may void users authority
to operate this device
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme a la norme NMB-003
du Canada.

Recycling the TA60

Environmental protection does not begin when it comes
time to dispose of the TA60; it begins with the
manufacturer. This product was designed according to
our internal norm "Environmental conscious product
design and development".
GENERAL AUTHORIZATION
1