Releasing The Cable Connection; Self-Test - Wincor Nixdorf TA60 User Manual

RELEASING THE CABLE CONNECTION

Releasing the Cable Connection
Never remove a cable from a connector socket by simply pulling on the
cable. Always remove the cable by the connector housing. Please follow the
instructions below when removing cables:
n
Turn off all switches to the mains and electrical equipment.
n
Remove all mains cables from the shockproof sockets installed in the
building.
n Loosen all cables on the electrical equipment.

Self-test

A self-test is performed each time the POS terminal is switched on. The
result of the test is reported to the system.
10
Using your thumb and forefinger,
pull gently on plastic connector
housing. Removing the
connector from the socket. This
unlocks the connector.
Now remove the connector from
the socket.