Keypad
In the TA60 keypad, two keys can be combined to form a double key, four
keys to form a quadruple key and six keys to form a sextuple key, either
horizontally or vertically. Only one key code is generated by each double or
quadruple key. Different key codes can be set for the multiple keys by
rotating the key caps. These caps have a guide cylinder that is shifted when
the cap is rotated, resulting in different key codes. This will lead to problems
if not observed.
Key switch
The TA60 keyboard is equipped with a key switch with 6 switch positions.
Switch position 0 is the basic position; switch positions 1-4 are provided for
customer-specific applications. In positions 0 and 1, the key can be
removed.
0
T
1
The sixth switch position, which
is designated on the lock by T, is
2
intended for use by Field
Engineering. From switch
3
position 0, the key provided can
be turned to position T only. This
4
key is not included in the scope
of supply.
The key switch has only one
closure, i.e. there is only one set
of keys for all keylocks that
includes the above-mentioned
key variants for the various
switch positions.
KEY SWITCH
9