Table of Contents
Advertisement
8 Care and maintenance
CAUTION
Before beginning cleaning, unplug the supply cord or
remove the battery from the power tool in order to
prevent unintentional starting.
DANGER
en
Remove the ST 1800‑A screwdriver, bit and magazine
guide from the stand-up tool.
8.1 Care of screwdriving bits
Clean off dirt and dust deposits adhering to the screw-
driving bits and spindle and protect them from corrosion
by wiping them from time to time with an oil-soaked rag.
8.2 Care of the appliance
DANGER
Keep the grips dry, clean and free from oil and grease.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information. Should you wish to return the appliance yourself to a disposal facility for recycling, dismantle it as far as
possible without need for special tools.
Separate the individual parts as follows:
Part / assembly
Grips
Gripping bars
Magazine guide
Main module
Screws, small parts
10 Manufacturer's warranty
Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so long
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or re-
placement of defective parts only over the entire lifespan
of the tool. Parts requiring repair or replacement as a
result of normal wear and tear are not covered by this
warranty.
10
The appliance can be washed under running water if it
has become very dirty. The appliance should then be
dried and rubbed with an oily cloth to prevent corrosion.
8.3 Maintenance
Check all external parts of the appliance for damage
at regular intervals and check that all controls operate
faultlessly. Do not operate the appliance if parts are
damaged or when the controls do not function faultlessly.
If necessary, the appliance should be repaired by Hilti
Service.
8.4 Checking the appliance after care and
maintenance
After carrying out care and maintenance, drive several
screws in order to check that the appliance functions
correctly.
Main material
Plastic
Aluminium
Plastic
Steel, aluminium, plastic
Steel
Additional claims are excluded, unless stringent na-
tional rules prohibit such exclusion. In particular, Hilti
is not obligated for direct, indirect, incidental or con-
sequential damages, losses or expenses in connec-
tion with, or by reason of, the use of, or inability to
use the tool for any purpose. Implied warranties of
merchantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send the tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
Recycling
Plastics recycling
Scrap metal
Plastics recycling
Scrap metal, plastics recycling
Scrap metal
Advertisement
Table of Contents
