Installing The Discharge Chute; Filling The Engine With Oil - Toro 38451 Operator's Manual

2

Installing the Discharge Chute

Parts needed for this procedure:
1 Discharge chute
1 Chute handle
3 Carriage bolts
3 Washers
3 Locknuts
Procedure
Install the discharge chute as shown (Figure 7).
Figure 7
3

Filling the Engine with Oil

No Parts Required
Procedure
Your machine does not come with oil in the engine, but
it does come with a bottle of oil.
Important: Before starting the engine, fill the
engine with oil.
Note: The bottle of oil may contain an ounce or two
more than the engine requires. Do not overfill the
engine.
Max fill: 20 oz. (0.6 l), type: automotive detergent oil
with an API service classification of SJ, SL, or higher.
Use Figure 8 below to select the best oil viscosity for the
outdoor temperature range expected:
1. Move the machine to a level surface.
2. Clean around the oil fill cap (Figure 9).
6
Figure 8