Product Overview; Adjusting The Control Cable; Operation - Toro 38451 Operator's Manual

1. Oil fill cap
3. Unscrew the oil fill cap and remove it.
4. With the machine in the operating position, carefully
pour oil into the crankcase. Allow a minute for the
oil to settle and add enough to bring it to the point
of overflow. There should be very little, if any, oil
left in the bottle.
5. Screw the oil fill cap into the oil fill hole and tighten
it securely.
4

Adjusting the Control Cable

No Parts Required
Procedure
Refer to Adjusting the Control Cable in Maintenance.
Figure 9

Product Overview

2
1
1. Discharge chute
2. Discharge chute handle
3. Fuel tank cap
4. Control bar
5. Recoil start handle
6. Primer

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
DANGER
Gasoline is extremely flammable and explosive. A
fire or explosion from gasoline can burn you and
others.
• To prevent a static charge from igniting the
gasoline, place the container and/or machine
on the ground before filling, not in a vehicle or
on an object.
• Fill the tank outdoors when the engine is cold.
Wipe up spills.
• Do not handle gasoline when smoking or around
an open flame or sparks.
• Store gasoline in an approved fuel container, out
of the reach of children.
• Do not tip the machine backward with fuel in
the fuel tank; otherwise, fuel may leak out of
the machine.
7
G016243
Figure 10
7. Electric-start button
(model 38452 only)
8. Ignition key
9. Choke lever
10. Oil drain plug
11. Oil fill cap