Video Adjustments - InFocus LP260 User Manual

U s i n g t
NOTE: When both the Video and
S-Video jacks are connected, the
S-video jack input is displayed.
When both the Y-Pb/Cb-Pr/Cr and
S-Video jacks are connected, the
Y-Pb/Cb-Pr/Cr jack input is
displayed.
26
h e P r o

Video Adjustments

Select Video mode by pressing the
pressing the
in the menu.
Video Source menu
The projector automatically detects the signal from any con-
nected video sources. If more than one source is connected, use
the Video Source menu to select the desire one.
1 Press the
then press the
The "Video Source" menu appears.
2 Press the
desired source.
Auto
In this mode, the projector automatically detects the incoming
video source and adjusts itself to optimize performance.
Video/S-Video/Y, Pb/Cb/Cr
When more than one video source is connected and the projector
cannot select the proper video source, select the desired source in
the menu.
j e c t o r
button on the remote, or clicking the video icon
video
button, navigate to the Video Source menu,
menu
button.
select
source menu
button and position the red arrow by the
point down
button on the keypad,
source