InFocus LP260 Quick Start

It's easy to connect your computer or video player to the
LP260 and start presenting.
Composite and
component
video input
Audio output
Computer input
1 To connect a computer, plug one end of the VGA cable into the
video connector on your computer and the other end into the Computer In connector
on the projector. If you want sound with your presentation, connect the audio cable.
NOTE: If you are connecting an older Macintosh computer that does not have a VGA 15-pin
connector, you must use Mac adaptors.
lens cap
2
Plug the power cord into the projector and into an electrical outlet. Press the Power button
on the keypad or remote to turn the projector on.
Turn on your computer or video player.
3
If you're using a laptop, activate its external video by pressing
the correct activation commands (sometimes the activation
button is labeled with an icon like
Position the projector the desired distance from the screen to get
4
the desired image size.
Adjust the height or focus of the image. Refer to the
5
If necessary, access the menus by pressing the menu button on the keypad or remote and use
6
the point buttons to further adjust the image.
009-0550-00
Q S
UICK TART
video
Y ––– Pb ⁄ Cb – Pr ⁄ Cr
reset audio OUT
computer IN
to AUDIO IN
to COMPUTER
IN
VGA cable
).
S-video
S-video input
AV
computer
audio
Computer audio In
IN
PC control
Computer mouse input
Video audio In
to audio
output
to video
output
LP260 User's Guide
20'
7.8'
4.6'
for more information.