Memory; Storing Settings In The Memory; Starting The Memory; Changing The Basic Settings - Siemens HF35M562B Instruction Manual

Memory

The memory gives you the option to store your own settings
and call them up again at any time. You have two memories
available: " " and " ". The memory is useful if you prepare
j k
one dish particularly frequently.

Storing settings in the memory

Press the button.
Ž
1.
Your appliance is ready for use.
Press the button for the microwave power setting you require.
2.
The display above the power lights up and a suggested
cooking time is displayed.
Set the cooking time using the rotary selector.
3.
Press the or button, a signal sounds.
j k
4.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Note: The programmes which have been set remain stored
even if there is a power cut.

Changing the basic settings

Your appliance has various basic settings which you can
change at any time.

Basic settings

In the table, you will find all the basic settings and options for
changing them.
Basic setting
Clock display
™‚
= on
‚
Signal duration
™ƒ
ƒ = medium = 2 minutes
Button tone
™„
= on
‚
Waiting time
™...
ƒ = medium = 5 seconds
Prerequisite: your appliance is switched off.
Press and hold the button for a few seconds.
0
1.
The first basic setting appears in the display.
You can change the basic setting by turning the rotary
2.
selector.
Confirm by pressing the
3.
The next basic setting appears in the display. You can go
through all of the basic settings with the
changes with the rotary selector.
To finish, press and hold the
4.
All settings are applied.
You can change the settings at any time.
Options
Clock display
= off
ƒ
= short = 10 seconds
‚
= long = 5 minutes
„
Button tone
= off
ƒ
= short = 2 seconds
‚
„ = long = 10 seconds
0 button.
0 button and make
0 button for a few seconds.

Starting the memory

You can start cooking at any time using the settings saved for
your meal.
Press the button.
Ž
1.
Your appliance is ready for use.
or ( button.
j k
2.
The stored settings are displayed.
Press the start button.
3.
The memory setting starts. The
in the display.
Note: Once operation has started, you can no longer change
the memory location.
The cooking time has elapsed.
A signal sounds. The memory function has finished. Use
the button to switch off the appliance or make new
Ž
settings. You can stop the audible signal by pressing the
button.
Pausing
Press the STOP button or open the appliance door. Operation
is suspended. After closing, press the start button. Operation
will then continue.
Explanation
Displays the clock
Audible signal after the cooking time has
elapsed
Confirmation tone when a button is pressed
Waiting time between two separate steps,
after setting
cooking time counts down
x
0
9