InFocus LP 815 User Manual page 8

Connector Panel
The projector provides three computer and three video connectors:
• one M1-D (HD, DVI, and computer)
• two VESA (HD, HD component, and computer)
• one component RCA
• one S-video
• one composite RCA
• one USB mouse (for use with the Computer 2 input only)
• one PS/2 mouse (for use with the Computer 3 input only)
It also has an RS-232 serial connector for serial control and an RJ-45 connec-
tor for networked control via ProjectorNet software. The Command Line
Interface (CLI) specifications and commands are on our website.
A 2.5 mm mini-jack trigger provides a 12 volt DC output. It provides a con-
stant output while the projector is on. If you connect your projection screen
to the trigger with an optional cable, when you turn on the projector the
screen will move down; when you turn the projector off, the screen will
return to the storage position. You must turn this feature on in the System
menu to use it. See page 34.
Wireless Projection
You can use the projector's M1 connector along with the InFocus
LiteShow wireless adapter and software for cable-free digital projection.
Contact an authorized InFocus dealer or visit the website listed on the back
inside cover of this User's Guide for more information.
component video
external PS/2
speakers mouse
s-video
(audio out)
RJ-45
network PS/2
I
O
composite
power switch
video
power
connector
screen trigger connection
+12v
2.5mm mono plug
6
M1-D computer
USB computer
monitor
mouse audio
audio in
R
monitor out
computer 2
computer 1
USB
L
computer 3 serial control
audio in
computer in
RS232 serial control
VESA computers
ground
to screen relay (see screen manufacturer
for details)
screen
trigger
trigger
lock